求一篇关于建行电子银行的外文文献 25000字英文左右 急用 谢啦！！有的话发我邮箱：_百度知道
求一篇关于建行电子银行的外文文献 25000字英文左右 急用 谢啦！！有的话发我邮箱：
只要DOC和TXT模式的
我有更好的答案
建行电子银行，应该是中国的。那么外文文献，应该是外国人研究憨激封刻莩灸凤熏脯抹中国的银行。不知道这样理解是否正确？
可以 啊！不过也可以是讲电子银行的，不知道你是不是有，有的话，请发我邮箱，谢谢!
其他类似问题
为您推荐：
您可能关注的推广回答者：
外文文献的相关知识
等待您来回答
下载知道APP
随时随地咨询
出门在外也不愁求环境影响评价英文文献一篇，字符数不少于25000，内容关于工程项目环评的，邮箱，不胜感_百度知道
求环境影响评价英文文献一篇，字符数不少于25000，内容关于工程项目环评的，邮箱，不胜感
提问者采纳
.), Lucia Aquilantib and Francesca Clementib aDepartment of Architecture Construction and Structures - DACS, is dependent on seasonal changes in the external environment [7], in buildings which are already characterized by a limited amount of air exchange.8; 0;Orazioa. A reduction in permeability. Moulds (typically present on construction materials) can be separated into three groups on the basis of their water activity (aw) [13]. The study was carried out in the following steps, in terms of percentage, 2000) in order to obtain better Biocontamination Article Outline 1, although moulds can grow at temperatures between 0 °C and 40 °C, Marco Palladinia. These different authors appear to be in agreement. Introduction 2; – inoculation of mould spores (3 species) on 7 types of material (2 plasters, classifying the various materials, can increase the indoor and surface RH% in winter [16], Italy bDepartment of Food Science, in indicating that different kinds of fungi require minimum levels of humidity in the support surface material in order to proliferate and these values vary for different species [6]. Results show a clear correlation between the organic substances 2008 Elsevier Ltd All rights reserved, indicate the following factors, [34] and [36], the level of airborne spores in the indoor environment. Correlation between the mould growth area and the content of organic substances 4. Windows manufacturers are currently producing systems with low permeability (class A4 UNI EN 12207, together with a series of other specific factors that can influence the growth of fungi.1, the light, Physics. Preliminary characterization 3; a suitable temperature range. Steps 2, which is one of the conditions able to influence the development of moulds.3, this directive fixed the minimum requirements which must be respected when building new structures and when renovating existing buildings so as to have a more effective reduction in energy consumption for the air-conditioning of91&#47.9, thermogravimetric analysis: – characterization of materials. Although each species has a preferential humidity for growth: oxygen availability, however, Università Politecnica delle Marche. Rousseau [2] and Hud [3]. Introduction The tendency in industrialized countries to reduce energy consumption has been accelerated in the EC member states by the introduction of the 2002/ Plaster, [9], etc. On the contrary.8 and 0. [5] have studied these conditions, 60131 Ancona, 2 paints). This directive specifically indicates that energy consumption in buildings should be limited and sets threshold values for the thermal resistance of the buildi and a certain degree of humidity [4]; a substrate of deposit that acts as nourishment, requiring a minimum aw between 0. Experimental evaluation of the growth rate of mould on finishes for indoor housing environments. A reduction in moisture content in building materials to below 80% RH% is, led to some undesired effects. Abstract We report the results of a study to evaluate the growth rate of three species of mould on plasters: Effects of the 2002&#47. This strategy has: pH value and the roughness of the substrate on which the mould grows, Via Brecce B revised 3 November 2008. Available online 21 November 2008; 0, finishes and paints typically used in structures with heavy weight building envelopes, methods 2. The aim was to determine the influence of the chemical composition (in terms of organic fraction of the materials) on the growth rate of moulds. Methods 3. Numerous studies have been conducted in recent years to address the environmental aspects that favour the growth and the subsequent sporulation of fungi species.2, 3 finishes, the biotic interaction aEC directive Marco D&#39. KeywordsCopyright &copy. As a consequence window manufacturers are improving the thermal property of windows by reducing the air permeability.3, plasters and finishes and the growth rate of the mould. Conclusions References 1. The last class includes the most toxic mould species for human health, a range going from 22 °C to 35 °C can be considered optimal for the species that are most frequently found inside buildings, Via Brecce Bianche, Università Politecnica delle Marche, capable of growing at aw &lt. Steps: primer coloniz – analysis of the mould growth rate using various experimental techniques (fluorescence91/91&#47, needing aw &gt. Adan [7] has verified that there are a considerable number of buildings that offer favourable temperature conditions for the germination and the growth of mould on construction material and indoor environment finishes. Materials 2; Paint.2; and tertiary colonizer or water- – growth in a climatic chamber (23 °C and 90% RH). Ayerst [12] has conducted experiments in order to characterize the ideal conditions and the minimum values of humidity required in the substrate for mildew formation, Agricultural Economics and Landscape Science - SAIFET, according to the fungi species. In fact: Mould.9. Krus et al. Results 3; secondary colonizer or phyllophane fungi, 60131 Ancona. Sedlbauer [8]. Baughman and Arens [6] have underlined that.1. These experiments indicate a range between 71% and 94%, the International Energy Agency [33] indicates an average RH% of 80% as the critical threshold for mould development, therefore, which may increase the indoor and surface relative humidity percentage (RH%) and lead to the development of mould in the indoor environments, Italy Received 15 May 2008, of moulds. Consequently there may be an increased growth of mould species on some parts of the walls, [12] and [35]; accepted 5 November 2008, Agricultural-Engineering. Growth rate of the mould 3, [10] and [11] has recently completed an important research and development study of models which are able to estimate mould groEC. This study is part of a more general research program which addresses the effects on indoor environment air quality based on the European directive 2002/EC directive [1]. Only a limited amount of information is available about the influence of the composition of the finish materials on the germination and development, however, the way to reduce mould growth, , materials
提问者评价
其他类似问题
为您推荐：
英文文献的相关知识
等待您来回答
下载知道APP
随时随地咨询
出门在外也不愁有关绩效管理或绩效考核的英文文献和翻译 英文字符25000左右_百度知道
有关绩效管理或绩效考核的英文文献和翻译 英文字符25000左右
关绩效管理或绩效考核的英文文献和翻译 英文字符25000左右，包括标点符号
我有更好的答案
给多少钱？翻译专业研究生，可与我百度联系
其他类似问题
为您推荐：
绩效考核的相关知识
等待您来回答
下载知道APP
随时随地咨询
出门在外也不愁跪求一篇关于资产证券话的英文文献25000个字符即可_百度知道
跪求一篇关于资产证券话的英文文献25000个字符即可
有的话可以发送到我的邮箱谢谢！可以用的话另有高分奖励！
提问者采纳
直接点击下载《Asset securitizations and credit risk》ME Barth://www.gsb.edu/facseminars/events/accounting/documents/acc_06_10_taylor.stanford.edu/facseminars/events/accounting/documents/acc_06_10_taylor, G Ormazabal, DJ Taylor.stanford://www, DD Fellowship - 2009
其他类似问题
为您推荐：
您可能关注的推广回答者：
英文文献的相关知识
等待您来回答
下载知道APP
随时随地咨询
出门在外也不愁急求一篇关于核心竞争力的外文文献，25000个英文字符，请发邮箱：，谢谢！！！！！！_百度知道
急求一篇关于核心竞争力的外文文献，25000个英文字符，请发邮箱：，谢谢！！！！！！
提问者采纳
推荐到OA图书馆。输入相应的英语关键词即可。都可以免费查找。
提问者评价
其他类似问题
为您推荐：
您可能关注的推广
外文文献的相关知识
等待您来回答
下载知道APP
随时随地咨询
出门在外也不愁