求PIN码wpa、wpa2破解器软件，重酬_百度知道
求PIN码wpa、wpa2破解器软件，重酬
提问者采纳
发个邮箱地址，我给你发个软件下载地址及教程
提问者评价
其他类似问题
pin码的相关知识
按默认排序
其他1条回答
地址告诉一下我啊？
等待您来回答
下载知道APP
随时随地咨询
出门在外也不愁转自：/yyangjjun/item/9dfe8ea1009b5ba
1: run wpa_supplicant firstuse the following command:wpa_supplicant -Dwext -iwlan0 -C/data/system/wpa_supplicant -c/data/misc/wifi/wpa_supplicant.conf2: Run the command line tool wpa_cli to connect wifiwpa_cli -p/data/system/wpa_supplicant -iwlan0Then , it will let you set network interactively&some common command:&scan = to scan the neighboring AP&scan_results = show the scan results&status = check out the current connection information&terminate = terminate wpa_supplicant&quit = exit wpa_cli&add_network = it will return a network id to you&set_network &network id& &variable& &value& = set network variables (shows list of variables when run without arguments), success will return OK, or will return Fail&select_network &network id& = select a network (disable others)&disable_network &network id& = disable a network&enable_network &network id& = enable a network& set_network 0 priority 0& list_network& save_config3: examplefor AP that doesn`t have encryption&add_network&&&&& (It will display a network id for you, assume it returns 0)&set_network 0 ssid &666&&set_network 0 key_mgmt NONE&enable_network 0&quitif normal, we have connectted to the AP &666&, now you need a IP to access internet, for example:dhcpcd wlan0if everything is ok, it will get an IP & can access internetfor AP that has WEP&add_network&&&&& (assume returns 1)&set_network 1 ssid &666&&set_network 1 key_mgmt NONE&set_network 1 wep_key0 &your ap passwork&(if usting ASCII, it need double quotation marks, if using hex, then don`t need the double quotation marks)&set_network 1 wep_tx_keyidx 0&select_network 1& (optional, remember, if you are connecting with another AP, you should select it to disable the another)&enable_network 1and then ,get an IP to access internetfor AP that has WPA-PSK/WPA2-PSK&add_network&&&&& (assume returns 2)&set_network 2 ssid &666&&set_network 2 psk &your pre-shared key&&select_network 2& (optional, remember, if you are connecting with another AP, you should select it to disable the another)&enable_network 2there is still some others options to be set, but wpa_supplicant will choose the default for you, the default will include all we need to set and then ,get an IP to access internet命令执行后，wpa_cli 会输出连接的过程信息。如果一切正确，则最后后输出：&2&CTRL-EVENT-CONNECTED - Connection to xx:xx:xx:xx:xx:xx completed (reauth) [id=0 id_str=]获取IP地址用 quit命令退出wpa_cli 。然后用dhclient wlan0命令获取IP地址。
阅读(...) 评论()5344人阅读
#&cp /media/sd8686.bin /lib/firmware/sd8686.bin# cp /media/sd8686_helper.bin /lib/firmware/sd8686_helper.bin# dpkg -i kernel-smartq5-modules_2.6.24.7-smartq5-050509_all.deb
# insmod sd8686.ko&
# ifconfig -a
# chmod 0660 /data/misc/wifi/wpa_supplicant.conf
* The content of wpa_supplicant.conf
update_config=1
ctrl_interface=DIR=/data/system/wpa_supplicant GROUP=1010
# /system/bin/wpa_supplicant -Dwext -iwlan0 -c /data/misc/wifi/wpa_supplicant.conf
# /system/bin/wpa_cli -i wlan0 -p /data/system/wpa_supplicant&& status&INACTIVE&& help&& add_network&& set_network 0 ssid "NETGEAR"&& set_network 0 key_mgmt NONE && set_network 0 priority 0&& list_network&& save_config&& enable_network 0&bssid=00:24:b2:5b:5b:0a ssid=NETGEAR &. wpa_state=COMPLETED
* 以上用户言论只代表其个人观点，不代表CSDN网站的观点或立场
访问：468401次
积分：6709
积分：6709
排名：第1188名
原创：174篇
转载：98篇
评论：107条
(1)(1)(1)(1)(2)(4)(9)(8)(3)(3)(6)(1)(6)(21)(4)(3)(1)(2)(13)(9)(2)(10)(5)(8)(18)(10)(16)(21)(13)(10)(6)(3)(5)(8)(15)(31)1545人阅读
1: run wpa_supplicant first
use the following command:
wpa_supplicant -Dwext -iwlan0 -C/data/system/wpa_supplicant -c/data/misc/wifi/wpa_supplicant.conf
2: Run the command line tool wpa_cli to connect wifi
wpa_cli -p/data/system/wpa_supplicant -iwlan0
Then , it will let you set network interactively
some common command:
&scan = to scan the neighboring AP
&scan_results = show the scan results
&status = check out the current connection information
&terminate = terminate wpa_supplicant
&quit = exit wpa_cli
&add_network = it will return a network id to you
&set_network &network id& &variable& &value& = set network variables (shows list of variables when run without arguments), success will return OK, or will return Fail
&select_network &network id& = select a network (disable others)
&disable_network &network id& = disable a network
&enable_network &network id& = enable a network
& set_network 0 priority 0
& list_network
& save_config
3: example
for AP that doesn`t have encryption
&add_network&&&&& (It will display a network id for you, assume it returns 0)
&set_network 0 ssid “666”
&set_network 0 key_mgmt NONE
&enable_network 0
if normal, we have connectted to the AP “666”, now you need a IP to access internet, for example:
dhcpcd wlan0
if everything is ok, it will get an IP & can access internet
for AP that has WEP
&add_network&&&&& (assume returns 1)
&set_network 1 ssid “666”
&set_network 1 key_mgmt NONE
&set_network 1 wep_key0 “your ap passwork”(if usting ASCII, it need double quotation marks, if using hex, then don`t need the double quotation marks)
&set_network 1 wep_tx_keyidx 0
&select_network 1& (optional, remember, if you are connecting with another AP, you should select it to disable the another)
&enable_network 1
and then ,get an IP to access internet
for AP that has WPA-PSK/WPA2-PSK
&add_network&&&&& (assume returns 2)
&set_network 2 ssid “666”
&set_network 2 psk “your pre-shared key”
&select_network 2& (optional, remember, if you are connecting with another AP, you should select it to disable the another)
&enable_network 2
there is still some others options to be set, but wpa_supplicant will choose the default for you, the default will include all we need to set and then ,get an IP to access internet
命令执行后，wpa_cli 会输出连接的过程信息。如果一切正确，则最后后输出：
&2&CTRL-EVENT-CONNECTED - Connection to xx:xx:xx:xx:xx:xx completed (reauth) [id=0 id_str=]
获取IP地址
命令退出wpa_cli 。然后用
dhclient wlan0
命令获取IP地址。
* 以上用户言论只代表其个人观点，不代表CSDN网站的观点或立场
访问：148301次
积分：1758
积分：1758
排名：第10152名
原创：22篇
转载：40篇
译文：12篇
评论：33条
(1)(3)(17)(1)(1)(1)(1)(1)(2)(5)(1)(3)(4)(12)(3)(4)(11)