经验337 米
在线时间9 小时
版本5.10.15
积分 377, 距离下一级还需 123 积分
积分 377, 距离下一级还需 123 积分
机型小米平板1
签到次数12
MIUI版本5.10.15
通过手机发布
如果可以关闭，那么可以运行win7，win8或者Android x86，也就是说可以运行6.0及以后的原生系统。
分享到微信朋友圈
打开微信，点击底部的“发现”，使用 “扫一扫” 即可将网页分享到我的朋友圈。
经验365 米
在线时间127 小时
版本6.9.22
积分 482, 距离下一级还需 18 积分
积分 482, 距离下一级还需 18 积分
机型小米Max 标准国际版
MIUI版本6.9.22
应该不行吧,系统不一样
经验6786 米
在线时间332 小时
机型小米MIX 2
签到次数165
MIUI版本8.2.2
在线时间8 小时
积分 54, 距离下一级还需 146 积分
积分 54, 距离下一级还需 146 积分
机型红米手机1S-电信版
BIOS设置以关闭secure boot，怎么关呢？
经验2204 米
在线时间36 小时
版本7.11.23
积分 2238, 距离下一级还需 2762 积分
积分 2238, 距离下一级还需 2762 积分
机型小米手机5s Plus
签到次数155
MIUI版本7.11.23
可以关，但是并不能运行你说的安卓等……
经验3384 米
在线时间39 小时
版本8.1.25
机型小米手机5
签到次数95
MIUI版本8.1.25
可以关，但是并不能运行你说的安卓等……
设置是灰色的，切换不了
经验2340 米
在线时间11 小时
版本6.11.17
积分 2654, 距离下一级还需 2346 积分
积分 2654, 距离下一级还需 2346 积分
机型小米平板2
签到次数36
MIUI版本6.11.17
可以的，OTG接键鼠，显示mi的时候立即按f2，在boot选项里有，自己找一下，关了安全启动后效果和解锁OEM一样的，开机有大大的mi
经验2340 米
在线时间11 小时
版本6.11.17
积分 2654, 距离下一级还需 2346 积分
积分 2654, 距离下一级还需 2346 积分
机型小米平板2
签到次数36
MIUI版本6.11.17
win10之外的ms系统主要有驱动，没有驱动也是白搭。安卓x86的话，刷win10的过度aosp包就是，广义点将，现在允许在pad上的MIUI，remix，aosp都是x86
经验360 米
在线时间209 小时
版本V8.2.1.0.LXACNDL
头像被屏蔽
机型小米手机2/2S
MIUI版本V8.2.1.0.LXACNDL
提示: 作者被禁止或删除 内容自动屏蔽
经验2860 米
在线时间44 小时
机型小米Note2
签到次数71
MIUI版本8.2.1
怎麼關？我也沒找到
MIUI 9纪念勋章
已关注极客秀微信
已关注微信
关注腾讯微博
已关注腾讯微博
关注新浪微博
已关注新浪微博
2018新年勋章
参与回帖活动
MIUI3亿用户纪念勋章
参与回帖活动
“澎湃S1 ”芯片纪念勋章
参与活动回帖可得
参与红米Note 4X活动
MIUI 300周
MIUI 300周更新纪念勋章
2017圣诞节勋章
参与回帖活动
感恩节勋章
参与回帖活动
万圣节勋章
参加回帖活动
MIUI七夕鹊桥勋章
MIUI七周年
2017年小金鸡勋章
回复2016年度评选活动贴
圣诞节勋章
参与圣诞活动
小米5发布会
参加小米5发布会直播页大转盘抽奖获得
MIUI六周年
MIUI六周年纪念勋章
Copyright (C) 2017 MIUI
京ICP备号 | 京公网安备34号 | 京ICP证110507号Data Recovery Software Products - Runtime Software Products
WinPE Support
You can run our programs from a bootable CD-ROM*), DVD, or USB stick. This article describes the WinBuilder boot CD-ROM. As an alternative, you can also use the easier to create, ready-to-use .
*) In this article we use the term &CD& for both media types, CDs and DVDs.
What is WinPE?
Microsoft's
is a stripped down version of Windows, capable of running from a boot CDs or
a USB stick.
Its name stands for &Windows Preinstallation Environment&. It is used as an
installation platform for OEM/Enterprise customers.
WinPE does not require a hard drive to boot, it can run solely from a CD or a USB stick using the memory for dynamic data. This feature makes WinPE appealing for
data recovery and system maintenance purposes. In fact, you can run our software
from such a boot medium. Since the primary purpose of WinPE is to install Windows, you can expect most hardware to be supported.
useful feature of WinPE is the ability to create a boot
medium that provides network access. You can even surf the Internet from
such a medium.
WinPE is not available for end user customers, but all files needed for WinPE
to run are included in a retail Windows installation DVD.
What is WinBuilder?
utility from http://theoven.org that helps you to create your own bootable CD or USB stick by
extracting the necessary files from your Windows installation DVD. There are currently four WinBuilder versions that work with the respective Windows installation DVD:
Win7PE SE - WinBuilder using a Windows 7 installation DVD, 32 or 64-bit,
Win8PE SE - WinBuilder using a Windows 8 installation DVD, 32 or 64-bit,
Win8.1PE SE - WinBuilder using a Windows 8.1 installation DVD,32 or 64-bit,
Win10PE SE - WinBuilder using a Windows 10 installation DVD, 32 or 64-bit,
If you do not have a retail Windows installation DVD at hand, WinBuilder provides links for the download of official ISO DVD images.
Available Plugins
WinBuilder lets you add other applications by using &plugins&. We have most of our products integrated into one plugin:
(contains GetDataBack Simple, GetDataBack for FAT, GetDataBack for NTFS, DriveImage XML, DiskExplorer for FAT, DiskExplorer for NTFS, DiskExplorer for Linux, Captain Nemo, NAS Data Recovery, RAID Recovery for Windows, RAID Reconstructor, DrvCopy (DC))
This single plugin contains all the necessary files from Runtime Software. If the software needs a license key you can
enter the license key in the application at run-time or in advance in a license file. In order to keep the plugins as small as possible we did not include the help file (CHM) or the startup flash logo.
Possible Uses
The most compelling benefit of WinPE is that you can run our data recovery
software on the affected computer without interfering with the hard drive you
want to recover data from. Remember, if you want to recover data you must not
write anything to the affected drive, leaving you in trouble if the drive in
question was the system (C:) drive. With a bootable CD or USB stick containing our plugin you
can recover your data without installing a new operating system.
Here are some typical uses:
without having to install a
complete Windows operating system. Boot from a CD-ROM or USB stick and run the data recovery
entirely from there using the RAM for dynamic data. Copy the recovered data to
another hard drive or - if you have network access enabled - to a network
destination.
Edit your hard drive with DiskExplorer. Have unlimited access to any area on
any of your drives. For example, after booting from the medium you can let
DiskExplorer overwrite your whole drive with zeros.
Easily make an image of a drive, locally or through the network.
Use a boot medium and restore your system drive from a backup with .
a Bootable CD-ROM With WinBuilder
Warning: If you are in a data recovery situation, do not create the bootable medium on
the computer where want to recover data from.
1. Download one of the WinBuilder projects above, for example Win10PE_SE_.zip.
2. Extract the zip file into C:\Win10PE
3. Run c:\win10pe\BuilderSE.exe
4. Click &Source&. In &Source directory& specify the location of the Windows installation files. This can be the DVD drive letter or the directory the installation files were copied to. In our example the content of the Windows 10 installation DVD is in the directory C:\Win10PE\en_windows_10_multiple_editions_version_1511_x64_dvd_7223712\.
5. Click the big blue &Play& button at the top right of the screen. WinBuilder should now create an ISO file that you can burn onto a CD and should be able to boot from. The processing should be finished after 5 to 10 minutes.
6. Once you successfully completed the build of your first boot CD please make sure you can actually boot your machine into it. In our example the ISO is located at c:\win10pe\ISO\Win10PESE_x64.ISO. Burn this ISO to a CD or DVD.
7. It is now time to add Runtime's plugin. Download our plugin .
8. Click &Script&. On the left-hand panel select &MyPlugins Direct&. Then click on &Put your Plugins here&.
9. Paste our plugin
into that directory.
10. Click the &Refresh& button. Make sure the checkbox next to &MyPlugins Direct\AppsMy\Runtime Software ALL& is checked. Verify all desired programs are included. Click &Refresh& again.
11. Verify the plugin is now visible under &Win10PE SE\AppsMy\Runtime Software ALL& as well.
12. On the left-hand side select &Win10PE SE&, then press the big blue &Play& button.
13. After 5 to 10 minutes the processing should conclude. Burn the resulting file c:\win10pe\ISO\Win10PESE_x64.ISO to a CD or DVD.
Boot your machine into the CD. The desktop should look like this:
Writing the ISO to a USB stick
Once you have a working ISO you can easily transfer it to a USB stick. Select a stick with a capacity between 1 GB and 32 GB.
1. Start WinBuilder and expand the &WinPE10 SE\WriteMedia& node.
2. Select the script &Copy to USB-Device&.
3. Set the drive letter of your new USB stick and click &Copy to USB&
4. Follow the on-screen instructions. You bootable USB stick is being prepared and ready to use after about 2 minutes.
Including license keys in the boot medium
You can enter license keys for the software on the fly, for example at the time when you want to copy files with GetDataBack. The downside of this approach is that after shutdown the software reverts to &unlicensed& and you would have to enter the key again.
In step 10 of the above instructions you can attach a license file to the boot medium. Create a file &C:\licenses.txt& and type this file name into the box labeled &Text file containing the software licenses&. Continue with the remaining steps in order to create a boot medium with licensed versions of our software.
The license file is a text file with the following format:
[Product1]
LicenseName=Name1
LicenseKey=Key1
[Product2]
LicenseName=Name2
LicenseKey=Key2
[ProductN]
LicenseName=NameN
LicenseKey=Key3
For example, if you want to include license keys
for &GetDataBack Simple& and &GetDataBack for NTFS& the license file would look like that:
[GetDataBack Simple]
LicenseName=Donald Duck
LicenseKey=S1334SDFD0340DSDF0989
[GetDataBack for NTFS]
LicenseName=Donald Duck
LicenseKey=H3DSFLK890DLSJLF9JKLJ
Troubleshooting and Support
Beside the text you
are just reading, we do not provide support regarding WinPE and WinBuilder. Please read the on-screen instructions as well as the help file that resides in the same directory as the WinBuilder. For more help consult the support forum on http://theoven.org.
We do not endorse running our programs under WinPE or a boot medium created
with WinBuilder. You assume all risks from the use of our software.
Since WinPE is a very reduced version of Windows
you should run our software
only if special circumstances prohibit the use in a full Windows installation. Some
features might not be available and our software might behave unpredictably. Due
to limited resources on WinPE our software can close unexpectedly. When using
our software under a boot medium the help system and foreign language modules
are not available.
When you use our software or the plugin posted above beyond the restrictions
of the shareware evaluation version you must have purchased a valid license key
from Runtime Software, LLC. You are not allowed to give away boot CDs,
DVDs, or USB sticks containing the full versions of our software. You are not allowed to use a boot
medium to circumvent license restrictions.
We do not provide support for creating a bootable medium or for the use of
our software running from a bootable medium.红米手机 &
高级手机控
扫码下载App一键签到 升级加速
小米笔记本启用SecureBoot的情况下安装Ubuntu
扫一扫！手机看帖更爽
有哪位大神在启用SecureBoot的情况下安装并启动了Ubuntu 16.04的没？我的小米安装Ubuntu没问题，可是在启用SecureBoot的情况下没法启动Ubuntu。升级固件BIOS有助于解决问题没？我电脑是16年买的。手动@开发人员按说Ubuntu是支持SecureBoot的，不知道小米有没有锁定只认证微软的启动签名呢？因为我是windows和Ubuntu双启动的，一个用于办公，一个用于开发，Windows系统分区启用了Bitlocker，关闭SecureBoot的话每次都要手动输入Bitlocker密码，很麻烦，所以现在都死要启动Ubuntu就关闭SecureBoot，要启动Windows的话又要改回SecureBoot。
扫描二维码，手机查看本帖
我的小米笔记本pro没关secure直接用u盘安装麒麟16.04成功了，但是后续驱动怎么装啊，目前蓝牙和wifi都不能用
SecureBoot本来就是微软搞出来限制其他系统的。。。你觉得呢
这个不行的，以小米和微软的关系。BIOS里面集成其他系统的证书感觉可能性很低。不知道有没有其他方法自己把系统证书弄进去
京ICP证110507号 京ICP备号求大神指导板2的secure boot在哪里关闭？【小米平板2吧】_百度贴吧
&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&签到排名：今日本吧第个签到，本吧因你更精彩，明天继续来努力！
本吧签到人数：0成为超级会员，使用一键签到本月漏签0次！成为超级会员，赠送8张补签卡连续签到：天&&累计签到：天超级会员单次开通12个月以上，赠送连续签到卡3张
关注：34,290贴子：
求大神指导板2的secure boot在哪里关闭？收藏
求大神指导板2的secure boot在哪里关闭？
登录百度帐号推荐应用Password · Cydia
If you install OpenSSH, you need to change your device's root password to prevent the possibility of unsavory people remotely logging into your device using the default password.Open Terminal on your desktop and log in over wifi1: Obtain Administrator AccessNote: this first step is only necessary if you are using MobileTerminal. If you logged in via SSH as root, you do not need to do this step, so skip to Step 2.Run "su root" and provide the root password. The default password as provided by Apple is "alpine".Here I also run "cd" only to shorten the otherwise very long prompt.
iPhone:~ mobile$ su root
iPhone:/var/mobile root# cd
iPhone:~ root#
2: Change the root PasswordRun "passwd" and type in your new password twice. Please note that your keypresses will not be displayed on the terminal screen (for security).
iPhone:~ root# passwd
Changing password for root.
New password:
Retype new password:
iPhone:~ root#
3: Change the mobile PasswordThis is the regular user account on the device. Run "passwd mobile" and repeat as directed above.
iPhone:~ root# passwd mobile
Changing password for mobile.
New password:
Retype new password:
iPhone:~ root#
4: Close your terminalCongratulations! Your job is done!